|
|
Access system with Ethernet interface
Knotek, Martin ; Hynčica, Ondřej (referee) ; Fiedler, Petr (advisor)
The access system with the Ethernet interface is presented in this diploma thesis. Access control system is based on the RFID technology. Each identification unit reads the users card number and sends the request to the server other the network. Server checks the card number and sends the answer. The doors are opened. The first part of this diploma thesis deals with the theoretical description of the access control systems. All used technologies are described in this first part of this work. The second part of this thesis describes hardware design of the RFID identification unit with the Ethernet interface and microcontroller Rabbit. The last part presents designed communication protocol. This protocol supports AES secure communication standard. The control program of the identification unit and to the software design of the database and the server application is made and described in this work too.
|
|
|
Laboratory stand with RABBIT CPU
Váša, Tomáš ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This master’s thesis contains design of laboratory stand for learning programming microcontrollers. Stand is equipped with two Rabbit modules, which are connected together over local area network. Exercises are focused on working with basic peripheries as digital inputs and outputs,PWM modulation, serial communication. Exercises are interested in evaluation of matrix keyboard and communication with alphanumeric display controller. With the ability to easy access the Internet some exercises are designed for work with this interface. To these exercises is made a preparation of external peripherals. Through these peripherals there can be can be controlled DC motors, step motor, binary outputs and inputs. Each lab exercise contains an introduction, task, instructions and the flowchart of realized exercise. Instructions are written so that it contains important steps to properly manage assignments. Individual exercises are designed to gradually increasing complexity of exercises.
|
|
|
Wireless access system
Sekyra, Jaroslav ; Honzík, Petr (referee) ; Fiedler, Petr (advisor)
This diploma thesis describes practical realization of entrance terminal, which enables transmission of data thanks to radio module ZigBee PAN4551 and Ethernet module Rabbit RCM3200. This entrance system uses Mifare RFID cards, with whose user will identify at the entrance terminal of the guarded object. Data are sent to server station by radio module ZigBee or Ethernet module Rabbit during demand of entrance. The database of all entrance rights of all users is stored on this server. Data system works up received data and sends them back to the terminal. One part of these data is the information about enabling of user entrance. The database system makes a list of passing through users. In the first part of this work whole conception of entrance terminal is suggested. Then basic demands of each block are described in details as well as their placement in guarded object. Next chapters describe basic function of terminal, electrical scheme, and system of power supplies for the access system. Also individual hardware components are chosen and described. In the on of the last chapter there is flow-process diagram of main loops for individual variants of terminal and interrupts functions from timer, serial link and external input from radio network MC13193 drawn. In the last chapter there is a show of server data application “AccessServer” and his basic description.
|
|
|
Home Security System
Herold, Radek ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
In the opening part of this thesis, the reader is briefly introduced into safety technique devices. There are basic types of security sensors discussed together with the most common methods of their connection with the security central. Further text focuses on elaborating the main topic of this thesis - the design of home security central equipped with a WiFi interface.
|
|
|
Analog 0-10V to Ethernet convertor
Hlúpik, Martin ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This Master`s thesis concern with problematic of connection analog sensors with voltage output 0-10V to a ethernet communication network. Due to a quick evolution and an application ethernet nets to industry and building technologies is possible to use this solution for connection remote diagnostics and setting of existing analog sensors without bus communication interfaces on instrumentation level of field bus networks. The converter is based on Rabbit module, which can be used like webserver for setting, calibration and data recording. For purpose of wide converter use the data output will be purvey on ethernet interface by Modbus TCP and on asynchronous serial interface RS232. First part of thesis is aimed on description of existing solutions and introduction with principles of linearization and calibration of A/D converters. Description of communication standard Modbus TCP widely used in industry applications. Second part of thesis describes design a realization of project. Here is described equipment block diagram with detail description of each block and devices used. In the part of implementation is description of device firmware with program function description and control. Last part is engage with module function verification supported with plantz of measurements and tests. The thesis is ended with evaluation results, knowledge and detections found out in development of project.
|
|
|
Ni sensors to Ethernet convertor
Kubíček, Ondřej ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
This work deals with hardware and software solution for the temperature converter of the standard rezistance temperature Ni sensors with the output through the Ethernet, driven by the Rabbit microcontroller. First part of this thesis deals with the theory of the temperature measurement. There are introduced basic principles of the temperature sensors. In the next part of the work are introduced communication standard and application protocol Modbus. The rest of the work deals with the hardware concept of the converter, the control program of the converter and the program developed for the PC.
|
|
|
Modulr RGB LED display
Coufal, Miroslav ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The aim of this master’s thesis was the design RGB LED display with Ethernet interface. I created a display module, controlled by a microcontroller ATmega 2560-16AU. These modules can be connected via a serial RS485 standard. Ethernet connection is made via plug-in interface that uses the programmable module Rabbit RCM 3200. I documented a proposal. I tested designed device.
|
|
|
Secure converter for an RS-232 standard to the Internet
Pokorný, Michal ; Mlýnek, Petr (referee) ; Koutný, Martin (advisor)
Master´s thesis tries to find a solution to make a secure transmission channel between virtual serial ports on the personal computer and the serial ports on the Rabbit RCM3700 development KIT. Today’s communications channels don't offer appropriate security of a whole communication. Therefore it depends on get-togethers, in order to realize this security themselves. This security means ensuring reliable transmission of data to be encrypted between parties so that any attacker is not able to read real-time, or eventually change them. As a result of this Master thesis is the design and implementation, which in addition to encryption algorithm provides sufficient security and authenticity of communication between the parties. As an encryption algorithm has been chosen widely used AES algorithm and as authentication algorithm has been chosen algorithm, which for authenticity requires knowledge of the secret key.
|
|
|
Analog 0-20mA to Ethernet convertor
Štreit, Zdeněk ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
The dissertation deals with a design of an intelligent transmitter of a standard current signal with an Ethernet output port, an implementation of a web interface and Modbus TCP protocol for providing data protection. The introductory part describes standardized analogue technical signals with their possibilities, and characteristics of industrial Ethernet. The subsequent part provides an overview of alternatives to connect analogue signals to Ethernet while using various modules. The thesis continues with a suggestion of an analogue input side of the transmitter in connection with a digital module of Ethernet based on the Rabbit processor in connection with the RCM3200 module. The key part of the dissertation puts forward a proposal of the firmware transmitter and control web interface, shows ways of providing figures measured by the current loop via Ethernet interface for further processing. The final part is devoted to a description of current transmitter ultimate measurement.
|
|
|
Power consumption analyzer
Spielmann, Ondřej ; Galetka, Josef (referee) ; Götthans, Tomáš (advisor)
The subject of master’s thesis is introduction with the principles of measuring voltage, current and electrical power in DC and AC systems. Is designed measurement system for normal household. Measurement system includes pricing and client billing. User interface Ethernet-based is implemented.
|
guest ::
